Radiator handling protection scheme

2022-07-22
  • Detail

At present, there are many radiators in shape, and we first need to carry our products before installation. In order to protect the integrity of our radiators, we can adopt the following schemes when carrying

there are many radiators in shape at present, and we first need to carry our products before installation. In order to protect the integrity of our radiators, we can adopt the following schemes when carrying

1. Radiators shall be lifted vertically and stacked neatly during assembly, pressure test and installation. When operating on the ground, a wooden board should be placed under it to avoid tilting or rusting. It should be rain proof and rust proof before painting

2. When the radiator is consigned to the building, attention should be paid not to knock the wooden door and the corner ground, and different protection points should be paid to products with different shapes. For example, protect the furnace leg of the column furnace blade to avoid breaking, and the airfoil furnace blade to prevent damage to the airfoil

3. Traditional radiators should prevent the blades from being knocked down during transportation and welding. Do not step on them at will after installation, and the curled blades should be repaired and leveled

4. Before spraying, measures should be taken to protect the installed radiator to prevent pollution and ensure cleanliness. The sundries between the blades should be cleaned and prevented from falling into the sundries

in short, when handling radiators, we should pay attention to avoiding bumps and folds, ensuring the integrity of the product and the cleanness of the whole product

copper aluminum radiator: http://www.ksgl2008.com/

top ten rankings of radiators: http://www.ksgl2008.com/ProductView.asp?ID=574& ; SortID=184

永州男科医院

南京男科医院

沈阳癫痫医院

昆明妇科医院

Copyright © 2011 JIN SHI